Meridian 541 Manual descargar pdf (Pagina 2)

92798 Cape Arago Hwy, Coos Bay, OR 97420 | 541-888-3517 | Toll Free 1-800-867-6863 | www.kksound.com

If you need to tighten

the clamp, loosen the

bottom clamp part to one

side but leave it attached

at the edge by the Velcro

(see the phot, right). Move

it up by 1/16” and press

the Velcro back together.

Slide the assembled

clamp/mic back onto the

guitar.

MICROPHONE POSITION

To start, position the mic as shown in the photos

below. Aim it more towards the sound hole for more

bass or more towards the 14th fret for a tighter and

brighter sound.

ALTERNATE POSITION

Please note that the foam windscreen sits snug on

the guitar top with some pressure from the

gooseneck that holds it down. This is a very quiet

positioning that minimizes unwanted handling noise.

We also found the sound quality superb for

recording. You can move the mic closer to the sound

hole or away from it to control the amount of bass.

To cut down on cable handling noise and for extra

strain relief please wrap the cable under the clamp

as shown below.

REMOVAL AND TRANSPORTATION

Remove the mic by pulling the assembled

clamp/mic off the guitar. If you want to leave the

clamp on the instrument, carefully remove the mic

from the little clip on the clamp.

We sell the clamp individually. For a quick

change from one instrument to another leave the

clamp on the guitar and buy another clamp or your

second instrument. You can easily remove/snap-on

the microphone itself with the little clip on the

clamp.

Please slide the supplied protective tubing over the

windscreen before you put your mic into the box.

This protects the windscreen foam and ensures it

holds its shape.

If you are using the microphone and clamp on

multiple guitars, please follow the complete

1 2 3 4 5

Comentarios a estos manuales

Sin comentarios

Meridian 541 Manual Pagina 2

Comentarios a estos manuales